Automatic atomizer for cleanroom biodecontamination, designed for pharmaceutical areas.
Smart Sterispray can cover up to 100 cubic meters and used with internationally recognized biocides, it ca...
Full Description

REQUEST INFORMATION

TECHNICAL DATA SHEET

COD: AM311 Category:

Description

Automatic atomizer for cleanroom biodecontamination, designed for pharmaceutical areas.
Smart Sterispray can cover up to 100 cubic meters and used with internationally recognized biocides, it can guarantee quick fumigation and short contact time, reaching up to Log 6 reduction on surface microbial loads. Smart Sterispray is programmable via web interface TCP/IP protocol or mobdus TCP. This allows a complete customization of the installation, giving the possibility to cover even the largest cleanrooms and to be programmed by a single operator. The quantity of the sprayed biocide can be customized during each cycle by means of the web interface. It is also possible to visualize historical biodecontamination cycles data and print reports. Smart Sterispray assures contamination prevention, allows the decontamination of out of reach critical surfaces and is ideal for material pass through.

Smart Sterispray comes complete with:

- pressure regulator
- manometer
- atomizer
- connection type Clamp 1/2"

Web communication: Ethernet RJ45 - Web HTTP - Modbus TCP.

Dimensions (L x P x H): 250 x 230 x 508 mm.

Packaging

Pack of 1 unit.

Available Versions and Data Sheets

AM300
Sterispray® must be connected to a compressed air (or nitrogen) system via the 1/2"clamp

Dimensions: 250 x 230 x 500 mm (L x W x H)
1 piece
TECHNICAL DATA SHEET

AM311
Sterispray® must be connected to a compressed air (or nitrogen) system via the 1/2"clamp
Remote control via web interface
GMP compliance: quantity of biocide used in each cycle verified; visualize historical biodecontamination cycles data and print report
Pack of 1 unit.
TECHNICAL DATA SHEET

AM312
Designed for small area. Quick connection 6mm diameter tubing system

Dimensions: 100 x 100 x 200 mm (L x W x H)
Pack of 1 unit.